APOLLO256-KBR is the BGA package version of Ambiq Micros Apollo1 MCU. It has 256KB Flash and 32KB RAM in a 64-pin BGA package.
Features
- Ultra-low active mode power consumption: 35µA/MHz (executing from Flash)
- Ultra-low sleep mode power consumption: 143nA (with RTC on)
- High-performance, 32-bit ARM Cortex-M4F processor
- Up to 24MHz clock frequency
- Floating point unit
- Wake-up interrupt controller with 12 interrupts
- Ultra-low power memory
- Up to 256kB Flash
- Up to 32kB low-leakage RAM
- Ultra-low power interface for off-chip sensors
- 10-bit, 13-channel, 1MS/s ADC
- Temperature sensor with ±4°C accuracy
- Rich set of timing peripherals
- Flexible serial peripherals
- I2C/SPI master for communication with external peripherals
- I2C/SPI slave for optional host communications
- UART for communication with peripherals and legacy devices
- Wide operating range: 1.8 to 3.8V
- Compact package options
- 64-pin BGA with 50 GPIO
- 41-pin CSP with 27 GPIO
Applications
- Consumer medical devices
- Consumer electronics
- Smart watches
- Smart meters
- Battery-powered applications
Documents
Datasheet: Apollo_MCU_Data_Sheet_DS-A1-1p00
Hardware Availability
The Apollo1 and Apollo2 MCUs and EVKs are available at the webshop of Fujitsu Electronics Europe GmbH (FEEU):