Fujitsu Apollo Evaluation Platform
The Fujitsu Apollo Evaluation Platform can be used with Ambiq Micro Apollo 1 or Apollo 2. The platform consists of two parts: The breakout board and the base board. The breakout boards of Apollo 1 and Apollo 2 are designed pin-compatible, so just some jumpers must be set on the base board for Apollo 1 or Apollo 2 usage.
The base board SK-AMAPOLLO-BASE-V11
The SK-AMAPOLLO-BASE-V11 evaluation board includes a low-cost evaluation board usable with FEEUs Ambiq Micro Apollo break-out boards SK-AMAP1-BREAKOUT-V11 (Apollo 1) and SK-AMAP2-BREAKOUT-V11 (Apollo 2).
Features
- Socket for SK-AMAP1-BREAKOUT-V11 / SK-AMAP2-BREAKOUT-V11
- Arduino UNO compatible pin headers
- 2 user push buttons
- 1 reset button
- 1 RGB LED
- On-Board USB Debugger Fujitsu D-Bug:
- CMSIS-DAP compatible debugger
- Additional UART channel
- Nano power measurement
- Power via DC connector
- Power via USB
- On-Board 3.3V voltage regulator
Dimensions
- Width: 68.6mm
- Height: 53.3mm
Scope of delivery
- Apollo base–board SK-AMAPOLLO-BASE-V11 in ESD bag
- USB-Micro cable
Not scope of delivery: SK-AMAP1-BREAKOUT-V11 / SK-AMAP2-BREAKOUT-V11
The Apollo 1 breakout board SK-AMAP1-BREAKOUT-V11
The SK-AMAP1-BREAKOUT-V11 evaluation board includes an Ambiq Micro Apollo 1 MCU with all pins available at 54 pins.
Features
- Ambiq Micro Apollo 1:
- Ultra-low active mode power consumption: 35µA/MHz (executing from Flash)
- Ultra-low sleep mode power consumption: 143nA (with RTC on)
- High-performance, 32-bit ARM Cortex-M4F processor
- Up to 24MHz clock frequency
- Floating point unit
- Wake-up interrupt controller with 12 interrupts
- Ultra-low power memory
- Up to 512kB Flash
- Up to 64kB low-leakage RAM
- Ultra-low power interface for off-chip sensors
- 10-bit, 13-channel, 1MS/s ADC
- Temperature sensor with ±4°C accuracy
- Rich set of timing peripherals
- Flexible serial peripherals
- I2C/SPI master for communication with external peripherals
- I2C/SPI slave for optional host communications
- UART for communication with peripherals and legacy devices
- Wide operating range: 1.8 to 3.8V
- Compact package options
- 64-pin BGA with 50 GPIO
- 41-pin CSP with 27 GPIO
- Parts assembled:
- MCU
- Passives
- Crystal
- DC/DC converter coils
- Reset button
- SWD Debug header
- 2x 27 pin headers 2.54mm
- 1x 10 pin communication header
Dimensions
- Width: 22mm
- Height: 70mm
Scope of delivery
- Apollo 1 breakout board SK-AMAP1-BREAKOUT-V11 in ESD bag
The Apollo 2 breakout board SK-AMAP2-BREAKOUT-V11
The SK-AMAP2-BREAKOUT-V11 evaluation board includes an Ambiq Micro Apollo 2 MCU with all pins available at 54 pins.
Features
- Ambiq Micro Apollo 2:
- Ultra-low supply current:
- <10 μA/MHz executing from flash at 3.3 V
- <10 μA/MHz executing from RAM at 3.3 V
- High-performance ARM Cortex-M4F Processor:
- Up to 48 MHz clock frequency
- Floating point unit
- Memory protection unit
- Wake-up interrupt controller with 32 interrupts
- Ultra-low power memory:
- Up to 1 MB of flash memory for code/data
- Up to 256 KB of low leakage RAM for code/data
- 16kB 2-way Associative Cache
- Ultra-low power interface for off-chip sensors:
- 14 bit, 15-channel, up to 1.2 MS/s ADC
- Temperature sensor with +/-3ºC accuracy
- Voltage Comparator
- Flexible serial peripherals:
- 6x I2C/SPI master for communication with sensors, radios, and other peripherals
- 1x I2C/SPI slave for host communications
- 2x UART for communication with peripherals and legacy devices
- PDM for mono and stereo audio microphones
- Rich set of clock sources:
- 32.768 kHz XTAL oscillator
- Low frequency RC oscillator – 1.024 kHz
- High frequency RC oscillator – 48 MHz
- RTC based on Ambiq’s AM08X5/18X5 families
- Compact package options:
- 2.5 x 2.5 mm (0.35mm) 49-pin CSP with 34 GPIO
- 4.5 x 4.5 mm (0.5mm) 64-pin BGA with 50 GPIO
- Ultra-low supply current:
- Parts assembled:
- MCU
- Passives
- Crystal
- DC/DC converter coils
- Reset button
- SWD Debug header
- 2x 27 pin headers 2.54mm
- 1x 10 pin communication header
Dimensions
- Width: 22mm
- Height: 70mm
Scope of delivery
- Apollo 2 breakout board SK-AMAP2-BREAKOUT-V11 in ESD bag
Documents
Factsheet_SK-AMAP1-BREAKOUT-V11.pdf (147 KB)
Factsheet_SK-AMAP2-BREAKOUT-V11.pdf (251 KB)
Factsheet_SK-AMAPOLLO-BASE-V11.pdf (320 KB)
See more information at: